Belcoin® Belgium
Your Trusted Supplier of Secured
Money Handling equipement
Visit and share your comments
INNOVATION RESEARCH KNOWLEDGE DEVELOPMENT DESIGN.
FP-004 Programmer
EASILY UPDATE YOUR FIRMWARE AS NEW EURO BILLS WILL BE RELEASED
This box is programmable by use of a PC and the corresponding looms, for easy updating the firmware of about 40 different products like bill acceptors, ticket printers, ID-card readers, etc.
New firmware will be mentioned on the corresponding product page and must be downloaded from the service page.
Contact us for more information.
FP-004 Service Manual
BELOW YOU CAN DOWNLOAD THE SERVICE MANUAL OF FP-004 PROGRAMMER BOX
Download and read the manual carefully before installing any sofware or firmware.
For updating the FP-004 programmer box with the latest firmware from your PC, you need a 12vDC-1000mA (1A) Regulated Power Adaptor (which is not included) and the following cables :
- #WEL-RF303 (Sub-D-Connector to PC COM-port)
- #WEL-RCC42 (to NE77)
Click the white male and female connectors together.
Most recent PC's do not support SUB-D connectors anymore. In that case you need an USB to Sub-D converting cable, which you can buy in your regular computer store.
Windows users should check the COM port number in their "Control Panel / Systems and Security / Device Manager" That number should correspond with the port number in the FP-004 application.
FP-004 Software
BELOW YOU CAN DOWNLOAD THE PROGRAMMER BOX SOFTWARE
Download and unzip the software before installing. Use the right looms to connect your hardware.
Open the "ICT" application. Select "Bill-Acceptor", "NE77", "FP004" and the COM-port dedicated by device manager. Click "Load File" and select the desired firmware file on your harddisk.
Click "Download" in the left upper corner and select FP-004. The firmware will be programmed in your FP-004 box. Every step is monitored on screen.
Once you succeeded, you can use this box to update all your NE77's on-site.
FP-004 Update Box
Use the links below to get more information on how to use the box, the software and the available firmware.